显示标签为“tpe factory”的博文。显示所有博文
显示标签为“tpe factory”的博文。显示所有博文

2016年7月28日星期四

PVC, silica gel and TPE-which is the best choice for sex toys ?

As sex toys are direct contact with human sexual organs, for the protection of the body, it is more important to Pursuit real sexual experience, These requir the raw material of sex toys must be very soft and healthy for body.the most common soft raw material including: PVC, silica gel and TPE (Thermoplastic Elastomer). different uses of sex toys,different hardness of the raw material. some dildos and vibrators for woman usually using the soft material of 5-20 shore A and the processing is injection molding.But some Male Masturbators usually using the ultra soft TPE material of below 0 shore A(such as:000 or even 00000) and the processing are injection molding and pouring. The pouring is usually used for the large size male sex toys.Let's talk about the Advantages and disadvantages of PVC, silica gel and TPE for sex toys.

Look at PVC first. PVC is a polyvinyl chloride resin,we can let the hardness of PVC drop to very sofe by adding a large number of plasticizer (usually phthalate plasticizer DOP) even 0 shore A.The advantage of PVC: low price, Bright color, can be rapid injection molding processing.The disavantage: bad smell, the most important is that plasticizer is poisonous. Although PVC is not directly contact with the human oral airway, people always worry about the safety.Some high-end sex toys always using more More environmentally friendly materials but not PVC. What is more,for some sex toys of blow 0 shore A, PVC is difficult to reach the ultra soft touching.

Look at the silica gel. Chemical element of silica gel is a silicon and oxygen, does not contain benzene toxic molecular structure, crosslinking agent of silica gel usually uses the environmental protection of varieties. Therefore, silica gel is a very environmentally friendly soft material. For a long time, silica gel is the most common soft material used in the dult products. The hardness of silica gel for adult products can be adjusted in 0~20 shore A. The disadvantage of silica gel:high price, long molding cycle, and the raw material can not be recycled.


Finally look at TPE/TPR. soft material TPE for sex toys is based on SEBS , we usually use the environmentally-friendly operating oil as a modifier to adjust the viscosity and hardness of SEBS. The formulation system is relatively simple because it is a super soft material for use in sex toys. TPE is a environmentally-friendly soft material and its constituent components-SEBS and operating oil do not contain plasticizers which can pass the detection of o-phenylenediamine 16p, nonyl phenol (NP), polycyclic aromatic hydrocarbons PAHs. The hardness of TPE can be adjusted to be softer than silica gel so TPE is the ideal raw material for sex toys. some TPE sex toys may be a little sticky feeling, there will be a certain smell because of the oil, we can add some Smoothing Agent and flavor to improve the properties. The advanatge of TPE: moderate price, Recycling materials, safety.


In general,if you really care about the price and have few requirements for the raw material,PVC is a choice for you.If you care about the experience and the environmental protection,silica gel and TPE are better than PVC. However,the price of silica gel is higher than TPE.As far as I'm concerned,i think TPE is the best choice for sex toys.

Read more about the TPE for sex toys : http://www.gainshinetpe.com/products/tpe-for-sex-toys

2016年5月18日星期三

How temperature influence the processing of TPE adhesion to ABS ??

It is very common for TPE adhesion to ABS. On the premise of no problem for the equipment and mould. Temperature is the main infuential factor of injection molding processing.

some time ago, i have follow a client who look for TPE materials adhesion ABS. His product is a button(size:80 mm long,20 mm wide, 2~3mm Thickness, Main material is ABS) so he want some TPE materials to adhesion to this button in order to get better soft feeling.
TPE adhesion to ABS

First step, i take some button samples to our engineers for testing. according to the result, they provide me a TPE materials(hardness:50A,specific gravity:1.07) with Good mobility. I carried these sample to my client's factory for testing the sample.

second step: the processing of testing. First time, their engineer adjusted the temperature of machine to 190 but the result is very bad because of the product deformation. Second time,185the result is better than first time. Third time, it is perfect.

Analysis summary: the reason of Product deformation is too much higher temperature during processing of overmolding and too fast speed of open mould. The concrete problem need a concrete analysis-GainShine TPE

click here to get more information about thermoplastic elastomers.

2016年5月17日星期二

GainShine TPE-custom-engineeres TPE solutions for you

Founded in 2002 and headquartered in ShenZhen, China, GainShine TPE has been in manufacturer of Thermoplastic Elastomers for more than 15 years. GainShine integrates its operations into the business divisions of TPEs, TPR, TPU, TPV, SEBS, SBS.GainShine TPE developed for use in the medical industries, overmolding, shoes, sex toys,stationery,sports equipment....
tpe materials


GainShine Thermoplastics’ elastomers (TPEs) are flexible, rubbery materials that do not require curing or vulcanization. GainShine Thermoplastics TPEs have become a widely used soft plastic materials in thousands of applications,such as: Medical Supplies Series, Overmolding Series, Automobile Series, Sex Toys Series, Children toys series, Shoes & Sole Series, Toughening series, Wire & Cable Series,  Sports Equipment Series, TPR Series,TPU Series,TPV Series.....


Our engineers provide and customize TPE solutonsaccording to customer’s exclusive requirements on product performance, just for making the best products. We continuously change and improve ourselves, only for you.
click here to request for a free sample !!!!!! or you can send us a email: gainshine@gstpe.com